Framework and workflow of inspection system for th

Framework and workflow of power equipment inspection system

the traditional power equipment inspection method generally adopts manual data processing, which is extremely inefficient, has a high error rate, troublesome data search, analysis and processing, and the effectiveness of Vickers hardness test is low. It is very inconvenient for staff to manually record inspection items, which is not convenient for storage and processing

according to the actual situation of the field equipment, combined with the use of RFID and GPS technology, this paper designs a set of substation and transmission line inspection system suitable for the power system. The system strictly controls the quality of equipment inspection, maintenance, detection and other work. At the same time, the objective, standardized and scientific management and supervision means provided by the system provide effective supervision basis and management means for managers, improve the equipment management level of the power system, and realize the automation and paperless data acquisition, so that it can not only provide good chemical and mechanical properties in the automotive power and power system, but also facilitate and efficient query of stored data and application results

1 system composition and framework

power equipment inspection system is mainly composed of the following parts: inspection system server (including database server, web server and inspection server), inspection system client, inspection handheld, field equipment, inspection signs. The topology of the inspection system is shown in Figure 1

2 system workflow

the system workflow diagram is shown in Figure 2

(1) system configuration. When the system is put into operation, it is necessary to configure the basic data of the system, including personnel, departments, inspection points, equipment, information, etc.), defect inspection content, inspection standards, equipment accounts and other information

(2) formulate tasks. The management personnel shall formulate specific inspection routes, assign inspectors and other information, set inspection time (temporary tasks or periodic tasks), and inspection type (normal inspection, special inspection, etc.)

(3) strive to realize the continuous, rapid and healthy development of the city's financial industry and accept the task. The operator accepts the task and transmits the patrol task from the system to the handset according to the prompt of the system

(4) perform patrol tasks. The operator shall sign in at the specified operation point according to the prompts of the handset, then check the equipment according to the prompts of the handset, and make records with the handset

(5) patrol data upload. When the inspection is completed, the data can be transmitted in real time through CDMA communication, or after the inspection is completed, the operator can upload the inspection results to the inspection system through the handheld

(d) inspection, analysis and synthesis. Inspect the inspection results, including in place information, defect information, route information, man hour statistics, trend analysis, equipment grading and defect elimination